Dimplex LAB 09M Instruções de Operação descarregar pdf (Página 19)

18EN -

Power for producing domestic water

Index - String

MIN

value

MAX

value

Parameter function

0% 100%

In those units that can produce domestic water, once this function has been activated

it is possible to decide the percentage of power to use for the production. This function

allows you to set a threshold to guarantee reduced energy consumption during domestic

water production.

Valve switch pause time

Index - String

MIN

value

MAX

value

Parameter function

secon-

600

secon-

This parameter allows you to establish the standby time (in seconds) for reversing the

3-way valve inserted in the system for producing domestic water.

Enable room thermostat control

Index - String

MIN

value

MAX

value

Parameter function

This parameter enables the possibility to join the ID digital clamp (marked on the electric

card enclosed with the unit as TRA) with a room thermostat on which the functioning of

the compressors and supplementary electric heaters will be disabled.

Remember also that setting this parameter with a value of:

• 1 or 2, you ENABLE this function

• 0 or 3, you DISABLE this function

Remember that the OPEN status of the clamp means:

• the function blocks the compressors and electric heaters if the parameter is set at 1

• the function blocks the compressors, pump and electric heaters if the parameter is

set at 2

• the pump alarm (as in the previous software version), if the parameter is set at 3

Remember also that by setting this parameter at 3, the moducontrol card is compatible

with the previous software version (3.6).

Enabling flow switch bypass

Index - String

MIN

value

MAX

value

Parameter function

When producing domestic hot water, the flow switch alarm can be bypassed to allow the

correct synchronisation between a diverting valve installed in the system, and unit fun-

ctioning during the production of domestic hot water.

Time for flow switch bypass

Index - String

MIN

value

MAX

value

Parameter function

secon-

300

secon-

This parameter allows you to establish the time (in seconds) for flow switch bypass.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

Comentários a estes Manuais

Sem comentários

Dimplex LAB 09M Instruções de Operação Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Bombas de calor Dimplex LAB 09M