Dimplex DAC12AC Especificações descarregar pdf (Página 22)

Keypad Functions:

Figure 1

Button 1 (Up Arrow): Pressing this button raises the selected value.

Button 2 (Set): Pressing this button for 1 second allows access to the “set-

point” of the chiller.

Pressing this button for 3 seconds will allow access to the

“set-point differential”, “password” and “ºC/ ºF” of the

chiller.

Button 3 (Down Arrow): Pressing this button lowers the selected value.

*Note 1: Password is used to access additional parameters in the controller. This

should only be accessed by a certified technician.

Changing the “set-point”:

To change the “set-point”, hold the “Set” key (see Keypad Functions) for 1 second until

you see the letters ‘st’. Then press the set key again to access the set-point. Use the “Up

Arrow” and “Down Arrow” keys to change the value. Once to the desired value, press

the “Set” key again to store the value.

*Note 2: The set-point can be set between 50ºF and 90 ºF

Changing the “set-point differential”:

To change the “set-point differential”, hold the “Set” key (see Keypad Functions) for 3

seconds until you see the letters ‘Ps’ (See Note 1: password is needed to save changes).

The use the arrow keys to scroll through the menus until you see the letters ‘rd’. Then

press the set key again to access the set-point differential. Use the “Up Arrow” and

“Down Arrow” keys to change the value. Once to the desired value, press the “Set” key

again to store the value.

*Note 3: The set-point differential should be set between 3ºF and 10 ºF

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Sem comentários

Dimplex DAC12AC Especificações Página 22