Dimplex DF2000 Manual de Serviço

Service ManualModel Number:DF2000UL Part Number690889XXXX7400690100R00In keeping with our policy of continuous product development, we reserve the rig

10 www.dimplex.com13. Slide the icker rod out of the snap-in bushing and remove.14. Reassemble in the reverse order as above.LED DRIVER

11ment lights and will need to be reinstalled in the original locations.10. Disconnect the wiring connections noting their original location. 11. Pr

12 www.dimplex.comPROBLEM CAUSE SOLUTIONGeneralCircuit breaker trips or fuse blows when unit is turned onShort in unit wiring. Trace wirin

13PROBLEM CAUSE SOLUTIONHeaterHeater is not turning off Improper operation Refer to Operation SectionDefective Heater On/Off Switch Replace Heater On/

2 www.dimplex.comAlways use a qualied technician or service agency to repair this replace.! NOTE: Procedures and techniques that are c

3Remote OperationThe replace is supplied with an integrated On/Off remote control. ! NOTE: Ensure that the replace 3 position switch is set to the r

4 www.dimplex.comMAINTENANCE WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of re, electric

5EXPLODED PARTS DIAGRAM61323459108714121511116REPLACEMENT PARTS1. Flicker Motor . . . . . . . . . . . . . . . . . . . . 2000220100RP2. Heater Assem

6 www.dimplex.comWIRING DIAGRAM Units with glass mediaUnits with log set

73-POSITION SWITCH REPLACEMENTTools Required: Phillips Head ScrewdriverFlat Head Screwdriver CAUTION: If unit was operating prior to servicing allo

8 www.dimplex.comTHERMOSTAT CONTROL REPLACEMENTTools Required: Phillips Head ScrewdriverFlat Head Screwdriver CAUTION: If unit was oper

9nect all of the wiring. WARNING: Ensure wires do not come in contact with moving parts by securing wires in wiring tie wraps.9. Reassemble in the