Dimplex A16M Manual de Instalação descarregar pdf (Página 8)

1 Introduction

Thank you for choosing a Dimplex Heat Pump. The

Dimplex A-Class heat pump provides outstanding

performance to maximise year-round efficiency,

regardless of the weather conditions. It can deliver

high output and high temperatures even at low

outside air temperatures of -7°C. The sophisticated

controller makes the system easy to use and there

are many more technological innovations including a

scroll compressor that uses enhanced vapour

injection.

2 Scope of delivery

Please ensure you check the scope of delivery before

signing any delivery documentation. Below is a

guideline checklist for what should be contained in

each pack. Claims for missing or damaged parts after

signing for the delivery will not be accepted.

There are 3 options to select from when installing a

Dimplex Heat Pump:

 Pack 1 - Space heating and Dimplex A-

Class Cylinder

 This pack should contain four boxes;

 Heat Pump

 ACCHYPK Hydraulics Kit A

 Cylinder

 Cylinder Accessories

 A separate wiring centre is not required as the

wiring centre is built into the cylinder.

 The ACCHYPK hydraulics kit A contains all of the

necessary hydraulic components.

 Pack 2 - Space heating and Dimplex

Standard Heat Pump Cylinder

 This pack should contain five boxes;

 Heat Pump

 ACCHYPK Hydraulics Kit A

 Cylinder

 Cylinder Accessories

 Wiring Centre

 A separate wiring centre is required as the

wiring centre is not built into the standard

cylinder.

 The ACCHYPK hydraulics kit A contains all of the

necessary hydraulic components.

 Pack 3 – Space heating only

 This pack should contain three boxes;

 Heat Pump

 ACCHYPK Hydraulics Kit A

 Wiring Centre

 Accessories

 A separate wiring centre is required to wire the

circulation pumps and controls.

 The ACSHYPK hydraulics kit B contains all of the

necessary hydraulic components.

Details of all packs/components provided are shown

on pages v-vii of this manual.

3 Pre-Installation Advice

3.1 Warnings

3.1.1 Handling and Transport

 When transporting, moving and installing the heat

pump, ensure that it is not tilted by more than 45°

(in any direction), for any prolonged period of

time.

 Do not attempt to lift the heat pump manually, as

it weighs 130kg and should only be lifted using the

appropriate lifting devices.

 Ensure that there is a clear pathway for a truck to

deliver the heat pump as close to the selected

location as possible.

 The installer must use a suitable lifting method, in

accordance with health and safety regulations.

 Straps must also be used with the lifting rod to

prevent the heat pump from toppling.

Figure 3: Handling of heat pump

Figure 2: Allowable tilt angle during handling

Tilt Angle

Max. 45°

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comentários a estes Manuais

Sem comentários

Dimplex A16M Manual de Instalação Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Bombas de calor Dimplex A16M