Dimplex KSS 2504 Instruções de Operação descarregar pdf (Página 15)

Installation Notes – Laying a Split Pipe

Siphon-shaped bending of the split pipes

Caution!

The bends are to be as tight as possible

observing the minimum permissible bend

radius (min. bend radius = 3.5 x outer

diameter of pipe)!

The split pipes can also be led out of the left side

of the indoor component (in the direction of the

pre-bent connection pipe); the thin areas in the

side of the casing must be cut out for this.

¹ Subsequent wrapping of the split pipes with fabric

adhesive tape (or aluminium adhesive tape) protects the

pipe insulation from damage by UV radiation and

mechanical damage (rubbing against masonry, bird bites)

and increases the rigidity of the pipes (if they are both

wrapped together) – we therefore recommend wrapping

the split pipes or laying them in covered conduits!



When laying split pipes, please note that if the difference in height between the indoor

and outdoor components is more than 3 m, the pipes must have a siphon-type bend and

a second siphon bend for a further 3 m difference!

Minimum height

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Sem comentários

Dimplex KSS 2504 Instruções de Operação Página 15