Dimplex KSS 2504 Instruções de Operação descarregar pdf (Página 3)

Check List

 Has a calculation of the cooling load been made?

 Is the cooling capacity of the device sufficient for the room to be cooled?

 Are the operating limits sufficient for the purpose for which the air conditioner is intended?

 Are the walls or the foundation for the installation of the outdoor unit strong enough?

 The indoor unit should be installed in a position where it ensures uniform cooling.

 Minimum clearances must be observed.

 Planning the installation of the outdoor unit.

 Consider noise emission and free air circulation, avoid direct sunlight, ensure unimpeded access to

the unit; the unit should be installed in a place to which the public does not have access.

 Is a wall bracket required for the outdoor unit?

 Plan the power cable and connection, ensure adequate fuses.

 Check the maximum length and feasibility of the refrigerant pipes.

 Refrigerant pipes should be as straight and short as possible.

 When laying refrigerant pipes it is essential to maintain a bend radius of 3.5 x diameter.

 Excess piping should be wound up at a downward angle to the outdoor unit in order to avoid residues of

refrigerant oil.

 Take account of differences in height between the room unit and the outdoor unit; if the outdoor unit is

higher than the room unit then one or more oil siphons should be provided as necessary.

 Plan condensation drainage.

 If the condensation pipe cannot be laid with a downward slope, the room unit must be provided with a

condensation pump.

 Condensation is always formed on the “cold” side of the air-conditioning plant, i.e. for cooling in the

room unit and for heating in the outdoor unit.

 Do you require permission from the local utility company?

1 2 3 4 5 6 7 8 ... 35 36

Sem comentários

Dimplex KSS 2504 Instruções de Operação Página 3